Network Zone Maintenance Configuration of CDI Settings for Shared Electronic Collections CDI settings for electronic collections in the Network Zone are individually configured for each Institution Zone that has access to a specific collection.  CDI Inheritance Parameter In order for each IZ to inherit the configured CDI settings for NZ shared e-collections, the  cdi_consortia_inheritance parameter must be set to Y (for Yes) in the Configuration > Resources > General > Other Settings page.   Notes on CDI Full-text activation in Alma consists of two parts : link resolver/link in record for full-text access, and search in CDI (flagged as full-text available) All full text collections that are active in Alma will be searchable by default, regardless of what their search activation status is You can have search in CDI without full-text links, but you cannot have full-text links without search in CDI unless you suppress it from being flagged as available in CDI If a collection is activated for a specific group of IZs, then CDI search is automatically active as well, even if the settings for CDI search activation status are set to No or None Full-text suppress means the full-text links (either linkresolver or link-in-record) are activated, but search in CDI is not active, because the resource is suppressed from being flagged as available in CDI. Do not show as full-text available in CDI even if active in Alma is the full-text suppress setting Can be used only if set on the same level (i.e. for the same groups) as the full-text activation This setting is recommended for e-books in order to cut down on duplicate e-book records It is recommended to set the We subscribe to only some titles in this collection to Yes for collections with Linkresolver full-text linking; this reduces errors in CDI linking CDI-only full text activation appears when Available for CDI search is set to Yes and the full-text linking is Link in Record. For use when your collection is inactive in Alma, you have the option to mark it as "Available Online" only in CDI. ( https://knowledge.exlibrisgroup.com/Alma/Product_Documentation/010Alma_Online_Help_(English)/Electronic_Resource_Management/060_Alma_Single_Activation_Source_for_CDI/020Single_Activation_with_the_Fully_Flexible_Setting#The_.E2.80.9CCDI-only_full_text_activation.E2.80.9D_Option )    Resources Single Activation with the Fully Flexible Setting Single Activation with the Fully Flexible Setting - Consortia CDI - Setting CDI Attributes (ODIN) Current WRLC NZ settings Collections with Book or Journal linking level and Linkresolver CDI Tab : for each IZ listed in the Group Settings tab for this particular collection, the settings should be as follows CDI Search Activation Status = Active (this setting actually doesn't matter because all full text collections that are active in Alma will be searchable by default, regardless of what their search activation status is) We subscribe to only some titles in this collection = Yes Do not show as full-text available in CDI even if active in Alma = Check for Yes   Collections with Book or Journal and Link in record CDI Tab : for each IZ listed in the Group Settings tab for this particular collection, the settings should be as follows CDI Search Activation Status = Active (this setting actually doesn't matter because all full text collections that are active in Alma will be searchable by default, regardless of what their search activation status is) CDI-only full text activation = Do not check We subscribe to only some titles in this collection = No Do not show as full-text available in CDI even if active in Alma = Check for Yes Collections with Article or Issue linking level and Linkresolver CDI Tab : for each IZ listed in the Group Settings tab for this particular collection, the settings should be as follows CDI Search Activation Status = Active (this setting actually doesn't matter because all full text collections that are active in Alma will be searchable by default, regardless of what their search activation status is) We subscribe to only some titles in this collection = Yes Do not show as full-text available in CDI even if active in Alma = Do not check Collections with Article or Issue linking level and Link in record CDI Tab : for each IZ listed in the Group Settings tab for this particular collection, the settings should be as follows CDI Search Activation Status = Active (this setting actually doesn't matter because all full text collections that are active in Alma will be searchable by default, regardless of what their search activation status is) CDI-only full text activation = Do not check We subscribe to only some titles in this collection = No Do not show as full-text available in CDI even if active in Alma = Do not check Database Collections with Link in Record CDI Tab : for each IZ listed in the Group Settings tab for this particular collection, the settings should be as follows CDI Search Activation Status = Active (this setting actually doesn't matter because all full text collections that are active in Alma will be searchable by default, regardless of what their search activation status is) CDI-only full text activation = Do not check Do not show as full-text available in CDI even if active in Alma = Do not check Letters managed in the Network Zone Pull Slip The Pull Slip is managed for our partners to provide consistency for the displayed location codes.  These codes are use to direct the physical items to the patron's selected pickup location. Notes:  The SCF's Pull Slip has further modifications to allow the letter to be used for ILLiad physical item requests that come to the SCF via the ILLiad Addon.  Currently, only GW is using the ILLiad Addon for this purpose.  The SCF's Pull Slip has further logic modifications to try to determine if a request created by the SCFapp is of request_type "MOVE_TO_TEMPORARY" or "RESOURCE_ SHARING_PHYSICAL_SHIPMENT".  (We are hopeful that Ex Libris will provide this information if/when they update the SCFapp for integration with Rapido(GM).) The SCF's Pull Slip is not managed in the Network Zone.   'On Hold Shelf' Letter   The On Hold Shelf Letter is managed in the Network Zone so that specific library instructions can be provided to the patron on when and how material can be picked up.  The original format of the letter only provided instructions from the owning library.  These instruction were not specific to the pickup location that the patron selected. Local Authority Headings Workflows The following are the workflows used by the WRLC Consortial Network Zone Manager to oversee, edit, and update the local authority records in the WRLC Network Zone environment. Replacement Headings Create local authority record. Save as a Local LCSH authority record in the NZ (do not import records, the headings will not link to an imported authority record unless that authority record is opened and saved in the Metadata Editor). Follow instructions for CZ records (see appropriate section below) Follow instructions for changing incorrect URIs for local flipped headings (see appropriate section below). Supplemental Headings Create local authority record. Save as a Local WRLC authority record in the NZ Add normalization rules to the WRLC transform 650 to 650 subf 2 local subf 5 CAO normalization rule Create set of NZ records containing original LCSH Run normalization rule on the set After 24 hours, check the results of the set to make sure the local headings are linked to their local authority records. Follow instructions for CZ records (see appropriate section below). Community Zone Local Headings Write normalization rule with title “WRLC CZ [New Heading] Local LCSH” Create a logical set of all CZ records with the original LCSH Run the normalization rule on the set. Save this as a recurring job (to run every 2 months on the 15th) Consortial NZ Manager will review results of scheduled jobs every 2 months  Documentation WRLC Local Subject Headings tracking spreadsheet : Replacement and Supplemental Heading Tracking Testing document : Local Authority Records Creating New NZ Analytics Users WRLC staff can fill out the NZ Analytics agreement form (which can be found here ) in order to have a user account created for them in WRLC's NZ Alma; this is so that they can access NZ Analytics and create queries and reports. Once a staff member fills out the form, an email is sent to the relevant WRLC staff. When creating an NZ Alma user account for accessing Analytics, the user account should have the following settings: Primary Identifier = work email address User group = WRLC Analytics User Expiration date = the date given by the staff member on the Google Form; if none is given, set a date for 2 years from now Password, Verify Password Give them a temporary password Checkmark 'Force password change on next login' User Roles Choose the Add from Profiles button Then choose the 'Designs Analytics' profile in order to give the user all of the necessary roles User Groups in the Network Zone There are two user groups in the Network Zone Alma. User Group User Group Code Type Notes WRLC HQ Staff wrlchq Internal User group for all staff working at WRLC HQ WRLC Analytics User wrlcanalytics Internal User group for patron accounts created solely for the use of NZ Analytics.  For more information, see the Creating New NZ Analytics Users page on the Alma Wiki.   How to Activate a CZ Collection in the Network Zone Below are instructions on how to activate a Community Zone (CZ) collection in the Network Zone. If you are activating a collection that will be used for AUTOHOLDINGS, please follow the instructions given on the Alma Knowledgebase for that particular vendor! 1. Search for the electronic collection in the CZ 2. Choose the Activate option for the collection. 3. In the Electronic Collection and Services Setup page : a. Under the Local Electronic Collection Information section i. Add the Public Name (override) to be the same name as the collection, with ' (WRLC)' added at the end of the name. This will help consortial staff identify the collection as a WRLC managed electronic collection. ii. Checkmark Mark Bib as suppressed . This ensures that the bibliographic record that describes the collection is suppressed from Primo; it does NOT suppress the portfolios attached to the collection. iii. Electronic Collection Proxy enabled = No . This ensures that a proxy is not added to the URL for the entire electronic collection; it does NOT remove a proxy from the portfolios attached to the collection. b. Under the Central Discovery Index Information section i. CD Search activation status = Active ii. We subscribe to only some titles in this collection = Yes Please note that the above setting may be changed later, depending on the linking settings of the collection. When first activating a collection, it is safest to set this criteria to 'Yes." iii. IF collection includes only ebooks, Checkmark Do not show as Full Text available in CDI even if active in Alma. IF collection includes journals, do not checkmark Do not show as Full Text available in CDI even if active in Alma. c, Under the F ull Text Service section i. Checkmark the following options Activate this electronic collection service Make service available Automatically delete portfolios removed from service ii. For the following option... Automatically activate new portfolios : only checkmark if NOT setting up an autoholdings collection, AND if all portfolios in the collection are available through our subscription. All remaining options can be left blank. ii. Then click Next. 4. In the Linking Information page : a, Under the Full Text Service - Linking Parameters section i. Leave all parameters blank b. Under the Full Text Service - Proxy setup section i. Proxy enabled = No . If the collection requires a proxy, the proxy settings for each individual Institution will be set later in the workflow. ii. Then click Next 5. In the Select Activation Method page : a.  Activate all - Activation of the complete electronic collection with no selection of portfolios  : choose if all portfolios in the collection are available through our subscription. b. Manual activation - activate electronic collection and manually select portfolios : choose this option if you are activating a collection that will be used for autoholdings. b. Then click Next 6. Review the Activation Summary page and make sure everything looks accurate. Click Activate to activate the collection. This will trigger an Activation job to run. 7. At this point, you will be brought back to your original Alma search page. Find the collection you just activated, and click on the house icon to view the same collection in the Network Zone (as opposed to the Community Zone). 8. Click on the ellipsis button, then choose Edit Service a. Go to the Linking tab i. Under the General Linking Information section IF a proxy is necessary for this resource, select Proxy enabled = Yes, then leave the Proxy selected drop down menu blank IF a proxy is NOT necessary for this resource, leave Proxy enabled = No. b. Go to the Group Settings tab i. Click Add Settings For Group to add each institution that has access to the collection.  ii. IF a proxy is necessary for this resource, select Resource Default for the Proxy Enabled configuration IF a proxy is NOT necessary, select No for the Proxy Enabled configuration; Do NOT choose Yes for Proxy Enabled. This setting is only for proxies configured in the Network Zone, and WRLC does not configure proxies in our NZ. iii. Proxy Selected is left blank. iv. Click Save, and repeat for each institution. If you choose Proxy Enabled = Resource Default , the settings applied to this institution will be defined by the settings in the Linking tab of the service (what was chosen in step a.i. of these instructions). Proxy settings set at the portfolio and collection levels can also affect whether a proxy is applied; for a full table of Proxy Relationships, please see the Proxy Relationships Alma Knowledgebase page . v. Once you have configured each Institution, click Save on the Electronic Service Editor page. Please note that there is also a Group Settings tab in the Edit Collection page; the Electronic Service page is the only one that should be edited for Group Settings.  c. Afterwards, you should be brought back to the Alma search page with a view of the electronic collection. 9. From here, click Edit Collection Go to the CDI tab and follow the instructions for setting CDI settings for electronic collections found on the  Configuration of CDI Settings for Shared Electronic Collections page on the Alma Wiki.